scem0
Sep 28, 04:11 PM
I have decided to make a thread because I have exhausted all my means of club searching, I have yet to get bad advice from MR, and lots of good clubs try to stay underground.
I love to dance. I try to dance 4 times a week, but usually I only get 3 nights per week. Wednesdays are always annoying because I can't ever find a club to go to and I have no class on Thursday, so I can sleep in.
So if anyone here is familiar with clubs in New York City, please help me out:
I'm gay - so a gay club is preferable, but I'd be more than willing to go to a straight club if they have good music. Mixed clubs are a lot of fun too. A place like webster hall, which isn't mixed at all would be a last resort.
I'm a poor student - free is preferable, but I'd be willing to pay up to $15, depending on how much I feel like dancing (which is usually quite a bit :p).
I want to dance, not lounge! So no lounges or bars, please!
I'm only 18, so 21+ clubs aren't possible. I don't have a fake ID, I don't drink.
I'm in Manhattan, and I'm not so keen about riding the subway from too far away back to my dorm at 3-5AM after I'm done dancing. So, a club in Manhattan would be nice, near Union Square would be awesome. I like to walk to/from clubs to warm up/cool down my legs. :)
It really is driving me nuts staying pent up in my dorm on Wednesday nights, when I'm in a dancing mood, so you have no idea how much I'll love you if you can find me a good place to go dancing on Wed. nights.
Thanks :),
_Emerson
I love to dance. I try to dance 4 times a week, but usually I only get 3 nights per week. Wednesdays are always annoying because I can't ever find a club to go to and I have no class on Thursday, so I can sleep in.
So if anyone here is familiar with clubs in New York City, please help me out:
I'm gay - so a gay club is preferable, but I'd be more than willing to go to a straight club if they have good music. Mixed clubs are a lot of fun too. A place like webster hall, which isn't mixed at all would be a last resort.
I'm a poor student - free is preferable, but I'd be willing to pay up to $15, depending on how much I feel like dancing (which is usually quite a bit :p).
I want to dance, not lounge! So no lounges or bars, please!
I'm only 18, so 21+ clubs aren't possible. I don't have a fake ID, I don't drink.
I'm in Manhattan, and I'm not so keen about riding the subway from too far away back to my dorm at 3-5AM after I'm done dancing. So, a club in Manhattan would be nice, near Union Square would be awesome. I like to walk to/from clubs to warm up/cool down my legs. :)
It really is driving me nuts staying pent up in my dorm on Wednesday nights, when I'm in a dancing mood, so you have no idea how much I'll love you if you can find me a good place to go dancing on Wed. nights.
Thanks :),
_Emerson
lynkynpark86
Feb 7, 09:03 AM
hi i have an ipod touch 4 JB on 4.1 i was just wondering that is there a way to put songs in to the ipod without connecting to itunes
and also any app for bluetooth transfer
Well, MewSeek is like limewire and, if you get the paid version, you can add songs to the ipod/music app. And Wifi sync lets you do just that, sync over wifi (but sadly not bluetooth)
and also any app for bluetooth transfer
Well, MewSeek is like limewire and, if you get the paid version, you can add songs to the ipod/music app. And Wifi sync lets you do just that, sync over wifi (but sadly not bluetooth)
ForumApple
Oct 17, 10:58 PM
thanks folks!!
I'll try all the solutions that you prodvided. If my cube gone crazy again, I'll just remove the gasket!
thanks a lot people! I'm new here, and this is a great forum with lots of great users!
I'll try all the solutions that you prodvided. If my cube gone crazy again, I'll just remove the gasket!
thanks a lot people! I'm new here, and this is a great forum with lots of great users!
edesignuk
Dec 15, 04:08 AM
hehehe, very good :cool:Now get back to work :p
more...
jadekitty24
Dec 16, 06:40 AM
Well, it can survive a hard fall of about 4 feet, I know that for sure. I own a G3 iBook without wireless (I'm broke) so I always have a 100 foot ethernet cord trailing behind me. Somehow, as I was walking from one room to another, I got tangled up in it, did a funny little twirly-dance, practically threw the iBook out of my way (if I would have landed on it there would surely be no chance of survival) and fell to the ground face first (ouch). The iBook landed hard on its left side. It was powered on, as a matter of fact I was browsing this forum. The sound it made on contact was horrible to say the least. But I'll be damned...so far not a thing wrong with it! When I say it took a hard hit I mean it REALLY took a hard hit. When I picked it up off the floor I wasn't breathing...it felt like my heart had stopped. The screen was black, all was quiet...for about 3 seconds. All of a sudden the screen lit up and it was right where I left it. I just had to reconnect to the internet and I was rolling again. Just wanted to share that with everyone, for I am blown away that the thing isn't dead. If a moose like me can't kill this iBook it is one hardy machine;)
MacBytes
Oct 4, 02:50 PM
http://www.macbytes.com/images/bytessig.gif (http://www.macbytes.com)
Category: Tips and How To's
Link: How to Identify if the GeForce 8600M GT of your MacBook Pro Is Defect (http://www.macbytes.com/link.php?sid=20101004155002)
Description:: none
Posted on MacBytes.com (http://www.macbytes.com)
Approved by Mudbug
Category: Tips and How To's
Link: How to Identify if the GeForce 8600M GT of your MacBook Pro Is Defect (http://www.macbytes.com/link.php?sid=20101004155002)
Description:: none
Posted on MacBytes.com (http://www.macbytes.com)
Approved by Mudbug
more...
jsw
Sep 19, 08:55 PM
I read on the forums that sometimes they keep iBooks with bigger HD's in stock because it's a popular upgrade.
I hope that they have one for you. Best of luck!
I hope that they have one for you. Best of luck!
skiltrip
Sep 25, 02:08 PM
They already do look alike. Honestly, most average people won't know the difference. I've already had people ask me if my new touch is an iPhone.
more...
FredAkbar
Jul 12, 01:15 AM
Originally posted by zimv20
every version of unix i've used -- dating to 1984 -- recognizes passwords up to 8-characters only.
But many Mac users know very little, if anything, about Unix. Mac OS X is a public operating system, made for users of any level of Unix experience. Many Mac users are still learning new things about Unix.
--Fred
every version of unix i've used -- dating to 1984 -- recognizes passwords up to 8-characters only.
But many Mac users know very little, if anything, about Unix. Mac OS X is a public operating system, made for users of any level of Unix experience. Many Mac users are still learning new things about Unix.
--Fred
nlivo
Jan 14, 07:37 PM
macworld is more exciting for me but that's only because the websites fuel the excitement. With Christmas there is nothing that builds the hype for you.
more...
thequicksilver
Jan 10, 11:53 AM
Yes, amongst many others.
http://www.mozilla.org/support/firefox/keyboard
Interestingly, the tab shifting buttons they mention in this doesn't work in my Firefox 1.0. I have to use ctrl-page up/dn as opposed to cmd-pageup/dn.
(I keep getting told the server is too busy, so hope this only posts once.)
http://www.mozilla.org/support/firefox/keyboard
Interestingly, the tab shifting buttons they mention in this doesn't work in my Firefox 1.0. I have to use ctrl-page up/dn as opposed to cmd-pageup/dn.
(I keep getting told the server is too busy, so hope this only posts once.)
dantiston
Apr 12, 01:42 PM
Here's a screenshot. I'm eager to learn how this might be setup wrong, as I'm bewildered as to the problem.
more...
dlee96
May 2, 12:53 PM
With the plastic clips, the springs were required to maintain pressure between the heatsink and the CPU. You don't need the springs if you're using screws and nuts. I used nylon screws and nylon lock nuts. I see temps a few degrees lower than yours while encoding. Remember not to use too much thermal paste.
I've recently installed a 2.33ghz c2d chip in my old 1.66 cd mac mini. The performance boost has been great!
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
I've recently installed a 2.33ghz c2d chip in my old 1.66 cd mac mini. The performance boost has been great!
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
simsaladimbamba
May 2, 03:52 PM
www.keepvid.com or ClickToFlash (though Flash may be needed) does allow downloading YT videos.
more...
mad jew
Dec 22, 10:23 PM
I think it only charges when the iBook is running from the mains power, not the battery, but I could be wrong. :o
Blue Velvet
Sep 10, 09:09 AM
Bring back Jim Morrison with the Doors. Convince him he's playing in Miami again...
more...
sporadicMotion
Jan 17, 08:14 PM
Another vote for the M-Audio Oxygen series. I had a Oxygen 49 that was quite good... best part is you can pick them up used for less than $100 (in Canada!).
Look hard enough an I bet you could get one in the US for $60?
Look hard enough an I bet you could get one in the US for $60?
shenfrey
May 6, 11:51 AM
Soon enough, the OP will have to submit a change to his name to ihaveimac
lol thats the first thing I thought when I saw the thread and his name I was like 'hmm, whats he gonna do when he gets an imac, make another account?" lol
lol thats the first thing I thought when I saw the thread and his name I was like 'hmm, whats he gonna do when he gets an imac, make another account?" lol
lkirkup
Mar 24, 10:33 AM
Hi All...
I was hoping for some help and guidance. I've been a network engineer for 15 years now. All of my experience is in the Microsoft arena. Lately, my organization has been adopting MAC / Apple products ( iPad, iPhones, etc. ) but we've now gone as far as to purchase our first MAC desktop system, an iMAC.
Having no formal training in administering an iMAC in a Windows AD Domain ( 2008 ) I've been scouring the internet ( Google ) looking for as much information as I can. So far, I've been able to integrate it into our AD Domain and have network users login and have access to their network home directories.
I am, however, suffering in a couple of areas and was hoping that I could get some real world advice on the following:
1) What is the best way for me to administer this computer remotely using my Windows 7 Pro workstation? Example: Remotely connecting to it for help desk and other needs. Currently I use Dameware NT Utilities to remotely connect and administer my PC based workstations. Is there a similar utility for iMAC's that will run on Windows 7?
2) Login scripts... How am I able to accomplish this on a MAC? My PC based workstations use a batch file to map network drives and other things needed at login.
3) What is the best way for me to be able to control the iMAC through Group Policies? Or maybe I should be asking if this is even possible?
I appreciate in advance for any help your able to give! :)
2) Use Automator to create an application and have it run at login.
specifically to mount network drives use "get specified servers"
and add servers as smb://xxx.xxx.xxx.xxx/mountfolder add as many as you need.
Then use "Connect to servers"
Save as an application and then in Accounts add to the login items.
Using Automator you will be able to do many other things on startup as well.
Also take a look at this
http://www.seminars.apple.com/contactme/pdf/L334436B_ActiveDirect_WP.pdf
short but sweet.
I was hoping for some help and guidance. I've been a network engineer for 15 years now. All of my experience is in the Microsoft arena. Lately, my organization has been adopting MAC / Apple products ( iPad, iPhones, etc. ) but we've now gone as far as to purchase our first MAC desktop system, an iMAC.
Having no formal training in administering an iMAC in a Windows AD Domain ( 2008 ) I've been scouring the internet ( Google ) looking for as much information as I can. So far, I've been able to integrate it into our AD Domain and have network users login and have access to their network home directories.
I am, however, suffering in a couple of areas and was hoping that I could get some real world advice on the following:
1) What is the best way for me to administer this computer remotely using my Windows 7 Pro workstation? Example: Remotely connecting to it for help desk and other needs. Currently I use Dameware NT Utilities to remotely connect and administer my PC based workstations. Is there a similar utility for iMAC's that will run on Windows 7?
2) Login scripts... How am I able to accomplish this on a MAC? My PC based workstations use a batch file to map network drives and other things needed at login.
3) What is the best way for me to be able to control the iMAC through Group Policies? Or maybe I should be asking if this is even possible?
I appreciate in advance for any help your able to give! :)
2) Use Automator to create an application and have it run at login.
specifically to mount network drives use "get specified servers"
and add servers as smb://xxx.xxx.xxx.xxx/mountfolder add as many as you need.
Then use "Connect to servers"
Save as an application and then in Accounts add to the login items.
Using Automator you will be able to do many other things on startup as well.
Also take a look at this
http://www.seminars.apple.com/contactme/pdf/L334436B_ActiveDirect_WP.pdf
short but sweet.
TheShinyMac
Apr 4, 08:57 PM
Physics. You haz broke dem
Chaszmyr
Dec 16, 12:55 PM
I don't mean to sound rude, but the problem isn't that OSX doesn't allow control, the problem is that you're not a knowledgeable user. There is no way to get Windows to run at full speed (or even decent speed) on a Mac, and there is no reason to use Apple hardware if you aren't paying the extra money for OSX.
Lionheart
Oct 26, 11:40 PM
Waiting in line for about 45 minutes...just because. Got my T-Shirt and my Family Pack.
Oh happy day!
Oh happy day!
reberto
Dec 7, 02:46 PM
Link doesn't work.
link fixed
link fixed
jiv3turkey748
Sep 17, 11:30 PM
i love that show but since school started i havent been able to watch it
No comments:
Post a Comment